Basic Info.
Size
1200/1500/1800*800*2350mm
Outer Color
Blue, Black, Grey, etc or Customizable
Performance
Corrosion Resistant; Acid and Alkali Resistant
Product Description
Overall dimensions: 1500*800*2350mm
Sash: Vertical rising type
Work Top: Chemical Resistant Laminate
Cupsink: Oval shaped PP Cupsink
Inside Lining: 4mm thickness of Compact.
Utility Service Fitting:
On the left side: Gas Valve: 1 No
On the right side: Water Valve: 1 No.
Eletrical Fittings:
15 Amp Switch with theree Sockets
1)Double Wall Construction:
Fume Hood sides shall be of double walled construction to enclose structure, service piping, sash mechanism, electrical wiring, air flow monitor etc. With suitably designed removable covers to provide access for inspection and maintainance. All side panels shall be removable. The structural design shall be such as to avoid load on end panels.
2)Material of Construction
The material of construction for Fume Hood interior is 4mm thickness of Compact.
Work Surface is 12.7 mm Wilsonart ProtectorTM.
3)Sash:
Fume Hood have vertical sliding clear safety glass sash of 6mm thickness. The sash operate in rope over ball bearing pulleys. When in closed position, the sash rest on top of the bottom airfoil and when fully raised, a clear height of open face is 750 mm. An additional view panel of 250mm above sash is provided. There is a provision of cable manager below the sash. For LCV hood, the sash is combination of horizontal & vertical sliding.
3) Noise & Face Velocity
Noise: ≤ 60dB (international standard). The exhaust system, consisting of existing exhaust blower and PP-FRP ducting fixed on the terrace, should be connected with the fume hood. The exhaust system maintains an average velocity of 0.5 m/ sec throught open face of the sash. All the fittings/baffles are used accordingly in the connection of the system.
4)Utilities
The PP cup sink with a 1 way wall type water outlet installed in the hood. 'Kerric' Brand of full-copper water outlet which is special lab purpose water lap, whose valve core adopts international general porcelain core and its surface is treated by epoxy resin powder spraying. The PP cup sink and drain are of the approved abality by the Engineer-In-Charge. The drainpipe from the sink is of 2" size and is laid till the main drain below the hood.
5)Taps and Control Valves:
There shall be a provision for water, compressed are ad vacuum taps. All the three taps shall be controlled from outside. The controls shall be on the left on front face of the Fume Hood.
The supply shall include 2 mtr of flexivle pressure tubing of 1/2" dia and 12 kg/cm2 pressure rating, for connection to laboratory service lines. On end of the tubing shall be joined to the tap using a cramped 1/2" BSP size nut ( similar to pressure hose) and the other end to the header line by another cramped nut. Three numbers of such arrangements are required for air, water & vacuum.
6)Light: 30w fluorescent lamp, at least 300LUX.
7)Air exhausting cover: 10 inch outlet.
8)Modularity:
The Fume Hood is designed in such a way that it can be assembled or disassembled easily. It shall be made preferably in two parts I. E. Upper Unit & Lower Unit.
Design Basis: | China industrial standard<Fume Hood>JB/T6412-1999 |
Shell: | 1.2mm thickness high quality cold-rolled steel with 0.5mm thickness of static epoxy resin power coated |
Lining: | Chemical & Heat Resistant, Fire Retardant, Smooth Finish, Easily Cleanable Panels Made out of durable Phenolic integral work walls (5 mm thick). |
Sash Opening | Minimum: 50mm; Maximum: 700mm |
Average face velocity | 0.5m/s |
Front Top Panel | Easily openable hinged Top Panel for easy access to Flow Control Valve and Electrical Lighting fixtures for maintenance. |
Work top: | Chemical resistant, splash & spillage proof dished 20mm ORNICES Ceramic Work top with built-in rounded edges rim on all four sides |
Windows: | 5mm toughened |
Window handle: | 1.5mm carbon steel |
Illumination: | 30W fluorescent lamp group, at least 300LUX |
Sink: | Imported PP pool |
Faucet: | Use brass body laboratory faucet with international ceramic valve core featured slowly down water pressure. The surface is coated with epoxy resin powder |
Exhaust duct: | glass steel tube or PVC tube, corrosion resistance |
Base: | 1.2mm thickness cold rolled steel sheet with 0.5mm thickness of epoxy resin powder finish |
Socket: | 15amp switch with three sockets |
Technical data: | noise: ≤60dB(international): wind speed: three-section exhaust |
Function: | intelligent auto-delay protected device, to prolong life by evacuate etchant gas |
Address:
Nanfeng Road No 1, 9/F, Xinan Town, Sanshui District, Foshan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals
Management System Certification:
ISO 14001, ISO 9001
Company Introduction:
Concerning design, production, marketing and installation of scientific laboratories, accessories, Kerric covered an area of more than 200 hectares, with standard factory building of 19, 600 square meters. Its Quality System is certified as complying with ISO9001-2000. Occupying an area of more than 200 hectares, with standard factory building of 19, 600 square meters, experience gained in installing hundreds and thousands of laboratories for public and private research and the conformity of products with the principal standards provide a guarantee for the customer. KERRIC has been expanded to further optimize the technology and adapting requirements of tomorrow′s laboratory. Contact us today and experience how world-class products, global design experience and a passion for excellence result in truly superior laboratory environments.
Main Business Lines:
Designing, Planing, Integration, Consultation, Manufacturing, Installation & Service for all Laboratory Requirement;
Laboratory Furniture;
Fume Hood, Enclosure & Ventilation Products;
Laboratory Air Flow Control System
Fume Hood and Air Flow Control System Performance, Testing, Calibration & Commisining
Comprehensive Supply of Lab Accessories
We welcome your questions, requests for information and ideas for improving our products and services.